Motorized XY microscope stage is ideal for transmissive and reflective imaging applications as well as processes which require access from above and below of the sample. Extremely low profile and compact design allow 8MTF-200 to be incorporated into many different types of scanning systems and easily mounted to most common microscope platforms.
Specifications
Model |
8MTF-200-4247 |
8MTF-200-4247-MEN1 |
8MTF-200-B43-MEN4 |
8MTF-200-B43-MEN4-LEN1-025 |
Travel Range (X x Y), mm |
200 x 200 |
Min. Incremental Motion, μm |
0.625 |
0.1 |
Rotary Encoder Type |
- |
Optical |
Rotary Encoder Model |
- |
MEN1 |
MEN4 |
Rotary Encoder Resolution, μm |
- |
0.5 |
0.1 |
Rotary Encoder Interface |
- |
TTL |
Differential RS422 |
Rotary Encoder Internal Multiplier |
- |
NO |
Rotary Encoder Multiplication factor 1) |
- |
Rotary Encoder Grating Period, deg |
- |
0.09 |
0.018 |
Rotary Encoder Reference Mark (Index) |
- |
Yes |
Linear Encoder Type |
- |
Optical |
Linear Encoder Model |
- |
LEn1 |
Linear Encoder Resolution, nm
Linear Encoder Interface
|
- |
25
Linear Encoder Interface
Differential RS4221)
|
Linear Encoder Internal Multiplier |
- |
YES |
Linear Encoder Multiplication factor |
- |
x200 |
Linear Encoder Grating Period, µm |
- |
20 |
Linear Encoder Reference Mark (Index) |
- |
YES (center) |
Absolute Accuracy 2) |
Before Calibration, µm/mm |
±8/100 |
After Calibration, µm |
request |
±3 |
±2 |
±1.5 |
Uni-Directional Repeatability, µm |
±0.50 |
Bi-Directional Repeatability (peak to peak) 2), µm |
±2 |
±1 |
±0.5 |
Bi-Directional Repeatability (RMS) 2), µm |
±1.5 |
±1 |
±0.45 |
Pitch 3), µrad / arcsec |
±100.00 / ±20.63 |
Yaw 3), µrad / arcsec |
±30.00 / ±6.19 |
Roll, µrad / arcsec |
±30.00 / ±6.19 |
Maximum Velocity (with load 4kg) 4), mm/s |
30 |
50 |
Maximum Acceleration (with load 4kg) 5), mm/s2 |
150 |
250 |
Limits Switches Type (Safety) |
Digital Hall Sensors |
Limit Switch Polarity (Safety) |
Pushed is open |
Limit Switch Voltage, VDC |
5...24 |
Load, Guiding & Transmission Information |
Design Type |
Motorized Ball Screw XY Planar Stage |
Ball Screw Pitch, mm |
2 |
Motor Model |
4247 |
B43 |
Motor Design Type |
Bipolar Stepper Motor |
3 Phase BLDC motor |
Maximum Bus Voltage, VDC |
48 |
Load Capacity (Centrally Placed) 6) |
Horizontal, kg |
8 |
Vertical, kg |
N/A |
Moving Mass 7), kg |
9.5 |
Guiding System |
Ultra-precise recirculating linear rails and carriages units |
1) With x4 evaluation; system can be delivered with standard analog SIN/COS encoder interface for personal interpolation.
2) Absolute Accuracy & Bi-Directional Repeatability measurements are processed with Zygo ZMI 501 Michelson laser interferometer.
3) Pitch & Yaw measurements are processed with 11D-ALI-COL electronic autocollimator. Resolution of 11D-ALI-COL: 1 µrad. Environment error: 1 µrad.
4) Maximum Velocity is electrically limited by encoder and driver CUT-OF frequency; maximum velocity is also limited by guiding system.
5) Maximum Acceleration is limited by Drivers` Peak Current, Motors` Peak Current and External Load (inertia). Please contact Standa for support.
6) Load Capacity is limited by position of load and integrated guiding system. Please contact Standa support for loading calculation.
7) Moving Mass is constant parameter of system which characterize m0 or inertia of unloaded system.
8) Recommended controllers & Recommended drivers can be optimized for a certain application. Please contact Standa support for recommendation.
9) Recommended power supply depends on required duty cycle and load. Please contact Standa support for recommendation.
10) Differential Outputs are available in passive (buffered) or active (modulated) way with LCMv2.
11) Stages can be assembled with better orthogonality by request.
12) Scalar Control can be implemented with USB / TCP-IP / RS-232 communication iterface; for vector control we recommend to use EtherCAT.
13) Protection of guiding system is limited and not supposed to be used in wet and dusty enviroment.